EvolvedTurtle@lemmy.world to 3DPrinting@lemmy.worldEnglish · 23 days agoHey can someone help with print quality this looks really stingy and sloppylemmy.worldimagemessage-square25fedilinkarrow-up172arrow-down12file-text
arrow-up170arrow-down1imageHey can someone help with print quality this looks really stingy and sloppylemmy.worldEvolvedTurtle@lemmy.world to 3DPrinting@lemmy.worldEnglish · 23 days agomessage-square25fedilinkfile-text
minus-squareEvolvedTurtle@lemmy.worldOPlinkfedilinkEnglisharrow-up7·23 days agoOh I didn’t even consider this I’ma try this first This filament has been sitting out for a while so this seems very possible
minus-squareSkyezOpen@lemmy.worldlinkfedilinkEnglisharrow-up4·23 days agoToss it in a box with dessicant packs for a few days. If it’s not flexible and breaks easily, it’s too moist.
minus-square🇦🇺𝕄𝕦𝕟𝕥𝕖𝕕𝕔𝕣𝕠𝕔𝕕𝕚𝕝𝕖@lemm.eelinkfedilinkEnglisharrow-up1·22 days agoPut it in the oven on a really low heat (like really low) should dry it out in like an hour or so.
minus-squareHootinNHollerin@lemmy.worldlinkfedilinkEnglisharrow-up1·22 days agoCan look up tables of temperatures and times for using an oven to dry various filaments. Putting in sealed container with desiccant could work but will take much longer
Oh I didn’t even consider this I’ma try this first
This filament has been sitting out for a while so this seems very possible
Toss it in a box with dessicant packs for a few days. If it’s not flexible and breaks easily, it’s too moist.
Put it in the oven on a really low heat (like really low) should dry it out in like an hour or so.
Can look up tables of temperatures and times for using an oven to dry various filaments. Putting in sealed container with desiccant could work but will take much longer