I also have a zen4 cpu.

The 30 second boots are memory training. The motherboard is basically training itself on how the DDR5 memory modules respond on every signal wire and it can be inordinately slow depending in memory amount. For whatever reason, AMD DDR5 systems are slower at it than comparable Intel DDR5 systems.

Update your BIOS to the latest version then enabled “Memory Context Restore”. The bios will then save the last training results and stop taking 30 seconds to start up.

Is yours a new AM5 socket based AMD system by any chance?

Being from a very rural area: guns are tools. They provide self defense against wildlife and crazy humans when you’re miles outside of law enforcement coverage, they are pest control, and they are a humane way of euthanasia when a farm animal is suffering.

And like most other tools, such as drills, post hole augers, machine lathes, tractors, cars, etc… they can maim and kill indiscriminately when used incorrectly or maliciously. But you cannot simply ban or remove the tool from everywhere because it is still serves a very important purpose. Can they be more controlled, education made mandatory, more stringent confiscation rules in the case of people with mental illness? Yes, and probably should. But you will never eliminate the firearm completely.

I am prepared to recieve the hate and downvotes for providing a measured, reasonable response.

Actually yeah. i’ll guarantee that was it. 14 days ago I was making fun of hexbear users defending russia’s war crimes in the memes /c/ of all places… which is weird that they defend it considering russia is very not-communist anymore.

still sucks since many of the largest communities around things like linux and tech are on .ml

Me during week 6 of continuous project management and sourcing quotes vs. me getting to do 15 minutes of a statics calculation by hand

Often a combination of temp too high, not enough retraction, or water contaminated filament.

If the plastic in the hot end is too hot it will keep “running” out of the nozzle after retraction and you’ll get strings. Similarly if you don’t retract enough to actually pull plastic out of the nozzle during a rapid move, it will want to keep pushing thru. This is supported by the little blobs it leaves on that angled surface corner its travelling to when stringing, thats excess material squeezing out during its rapid moves then being left on that wall.
And if there’s water in your filament all bets are off on how it’ll behave.

215 is pretty warm for that esun PLA especially if you’re using the stock brass nozzle, try bumping that down to 205 or even 200, and increase your retraction speed and distance settings in prusaslicer a tiny amount (0.1mm distance, 2mm/s speed at a time until you see improvement is plenty)

Use a temperature calibration tower to test things out.

can’t wait to see the hexbear response to this one

Instead let’s stay here till 2:30a playing dumb video game, become sleep deprived, and hate my entire existence in the morning even more than I already did

They still do. There’s so much shit in Windows 10/11that could phone home and shut down your install if you don’t have a valid license, but Microsoft doesn’t actually give a shit if you have a license or not. They just want to make sure you have their botnet installed and not any other OS.

Turns out the secret to gaining interest from women is… checks notes good diet, getting fit and healthy, having a consistent tastful style, eand being well read in an interesting hobby.

Never would have fu-cking guessed.

Sounded like you’ll be lucky to get it running even on a normal Windows rig let alone via proton lol. Paradox doing Paradox things

=ceiling(pi(),1)

Aside from hard science and engineering degrees where the technical knowledge is a foundation for what you’ll learn in industry, a college degree is simply a piece of paper that says “I received a balanced education and have my life together enough to focus, manage time, and complete tasks reliably for 4 years straight.” Rarely do you ever use most of the knowledge you gained in college besides the aforementioned life management skills.

Darth Stupidus

Because in the words of GabeN, piracy (in a 1st world country at least) is a service problem and not a pricing problem. Many things are worth paying for, especially when you are supporting smaller creators, artists and indie game devs. But when heavy-handed DRM’s and corporate shovelware and services that actively remove content I pay for makes it a shit experience. I’m gonna just torrent that shit, fuck 'em

I’m sorry to tell you this, but, uh… they weren’t in quarantine.

Well just don’t ask a Pentium processor for it either…

Y’all need more fiber in ya life

Nah. IA doesn’t need to deal with this volume of shit and they already have enough of a hard time dealing with copyright trolls.

If this channel is impacted in the future, I’ll probably put out a few torrents with the videos and post them here.

And mind you, they have a high number of videos but most are short clips and all of them are low res, 360p or 480p max. Any other channel uploading HD or 4k content will be orders of magnitudes larger for fewer videos.