Track_Shovel@slrpnk.net to Lemmy Shitpost@lemmy.worldEnglish · 2 months agoForm over functionslrpnk.netimagemessage-square46linkfedilinkarrow-up1286arrow-down10
arrow-up1286arrow-down1imageForm over functionslrpnk.netTrack_Shovel@slrpnk.net to Lemmy Shitpost@lemmy.worldEnglish · 2 months agomessage-square46linkfedilink
minus-squareklay1@lemmy.worldlinkfedilinkarrow-up22·edit-22 months agoonly the top is in the burning chamber. The paint will cause friction when the piston should roll veeeery smoothly over the crank and when moving upside down in the cylinder. There are plenty of engine failures in these areas even without paint.
minus-squareYiddishMcSquidish@lemmy.todaylinkfedilinkEnglisharrow-up16·2 months agoThe real problem would be getting them into the block.
minus-squaremarcos@lemmy.worldlinkfedilinkarrow-up5·2 months agoIt would either be impossible to assemble or lose 90% of its efficiency in a few cycles after the paint goes away.
deleted by creator
only the top is in the burning chamber. The paint will cause friction when the piston should roll veeeery smoothly over the crank and when moving upside down in the cylinder. There are plenty of engine failures in these areas even without paint.
deleted by creator
The real problem would be getting them into the block.
It would either be impossible to assemble or lose 90% of its efficiency in a few cycles after the paint goes away.